Купете MD15/C от Nuova Fima в България

Pressure gauge Type: 01.20.3.A.G.ABFD.41M.L02 Execution: All st.st. bourdon tube pressure gauge, SOLID FRONT, Glycerine filled Mounting: direct Diameter: DN 150 Connection: 1/2" BSP male in st.st. AISI 316 L Range: 0-15 psi Case material: bayonet-lock case in st.st. AISI 304 Window material: safety glass Accuracy: Kl. 1.0 with adjustable pointer

pressure switch

00020 201071825 GAUGE:PRESS;0-10KG/CM2,1/8IN,NPT,2-1/2IN GAUGE: PRESSURE RANGE: 0-10 KILOGRAM PER SQUARE CENTIMETER CONNECTION SIZE: 1/8 IN CONNECTION: NATIONAL PIPE THREAD FACE SIZE: 2-1/2 IN CONNECTION LOCATION: LOWER MANUFACTURER: NUOVA FIMA MODEL NUMBER: 52240251060000 *PHOTOS ATTACHED* 00030 201090588 TRANSDUCER:ELECTRO PNEUMATIC,4 TO 20MA,%

TEMPERATURE GAUGE, RANGE 0-160C, APPLICABLE SERIAL NO 2758/02

TEMPERATURE GAUGE, RANGE 0-200C, APPLICABLE SERIAL NO 2758/06

thermostat

(Test- und Konformitätserklärung 3.1 von NUOVA FIMA)

Differential pressure gauge Range : 600 m bar, Dial Size: 4" The ordering code is : 2 16 1 A E --- A 600Mbar 43M S31 R10

Pressure sensor Type: 08.S18 Execution: pressure sensor with ceramic cell Accuracy: 0,5% F.S.V acc. to IEC 60770-Limit point Electrical connection: Male and female plug DIN 43650 Specification Code acc. to Data-sheet 08 = Electronics S18 = Pressure transmitter AAFJ = 0-40 bar 23M = process connection: 1/4 NPT male 1 = output: 4...20 mA- 2 wires , supply: 8...30 V

Pressure sensor Execution: pressure sensor with ceramic cell

Pressure sensor Type: 08.S18 Execution: pressure sensor with ceramic cell Accuracy: 0,5% F.S.V acc. to IEC 60770-Limit point Electrical connection: Male and female plug DIN 43650 Specification Code acc. to Data-sheet 08 = Electronics S18 = Pressure transmitter 0-600 bar = range 43M = process connection: 1/2 NPT male 10E = output: 4-20 mA, 2 wire / supply: 10..30 VDC Please check the process connection and output. It was not specified in the inquiry.

Pressure sensor Type: 08.S18 Execution: pressure sensor with ceramic cell Accuracy: 0,25 % F.S.V acc. to IEC 60770-Limit point Electrical connection: Male and female plug DIN 43650 Specification Code acc. to Data-sheet 08 = Electronics S18 = Pressure transmitter AAFE = 0-16 bar 23M = process connection: 1/4 NPT male 1 = output: 4...20 mA- 2 wires , supply: 8...30 V FPM = Viton gasket K02 = accuracy 0,25%

Statistische Warennummer: 90262040 Pressure transmitter with local readout for homogenizer Type: 08.MOM.3.A.E.AAFZ (0...400 bar).422.1. Filling liquid: dielectric oil Mounting: direct, bottom connection Dial diameter: 100 mm Process connection: SA422 Range: 0-400 bar case in st.st. AISI 304 glass window Output: 4-20 mA Power Supply: 10...30Vcc with logo "NUOVA FIMA" and "LR"

Pressure gauge Type: 1.20.3.A.E.41M. Execution: all st.st. bourdon tube pressure gauge Solid front execution, glycerine filled Mounting:direct dial diameter: DN 100 Range: 0-16 bar Case material: bayonet-lock case in st.st. AISI 304 window material: safety glass accuracy: Kl. 1,0 with diaphragm seal MGS 9/2B 4.2B0.9.9.43F.41F.BAI diaphragm in Hastelloy C276 process connecion in Hastelloy C276 process connection: 1/2" NPT female

(Pressure gauge Type: 01.18.1.A.G.43M.T01 Execution: all st.st. bourdon tube pressure gauge Mounting: direct Diameter: DN 150 (6") Connection: 1/2" NPT male, bottom Range: 0/100 bar Case material: bayonet-lock case in st.st. AISI 304 Window material: glass Accuracy: Kl. 1.0 Specials: tropicalization + Diaphragm Seal MGS 9/111 04.111.4.4.41F.43M gauge connection: 1/2" BSP female process connection: 1/2" NPT male)

pressure gauge range 0 – 400 Bar

KAMERA

Master gauge (10” dial size), 30 Bar: 1 nos Accuracy +/- 0.1%

Master gauge (10” dial size), 250 Bar: 1 nos , Accuracy +/- 0.1%

(version "all stainless steel": DN 63) 1.18.3.DC0/16 BAR.21M

(Pressure gauge Type: 01.M2.3-D-E-0/400 bar-41M-04D.BM2.E Execution: all st.st. bourdon tube pressure gauge MCE18/3/E oil filled with double electric contact Mounting: with front flange diameter: DN 100 Connection: 1/2" BSP back in st.st. AISI 316L Range: 0-400 bar Case material: bayonet-lock case in st.st. AISI 304 window material: Plexiglas contacts: First contact opening, second contact opening on rising pressure, magnetic snap action)

Überdruckschutzvorrichtung, Bestellnummer: 5 48A 5 41M 41F

манометър

1.18.3.A.E.---.DAE7.41M.KCS ALL ST. ST. PRESSURE GAUGE, MODEL MGS18. 4" (100 MM) CASE DIAMETER. BOTTOM CONNECTION., RANGE 0...6 BAR/PSI, 1/2" BSP MALE PROCESS CONNECTION, ALUMINIUM DIAL, WHITE BACKGROUND WITH BLACK MARKINGS AND FIGURES, ST. ST. CASE AND BAYONET RING, DIRECT MOUNTING, ST. ST. PRECISION MOVEMENT, BLACK ALUMINIUM POINTER, ACCURACY ±1,0%, GLYCERINE FILLING, IP67 PROTECTION DEGREE, TEMPERED GLASS WINDOW, ST.ST. RESTRICTOR, MOUNTING WITH DIAPHRAGM SEAL

A 106 GR B carbon steel process connection 1/2" BSP male gauge connection: 1/2" BSP female

o. 3/20800420/10 Flow: 23,000 Nm3 H: 760 mbar

Thermometer, ½” Q: 100 0-150

БИМЕТАЛЕН ТЕРМОМЕТЪР